Quite a few homes have fireplaces, but not all of them are fit to be used as they are because they have not been cleaned in so long that when you do try to use them, it fills the house with smoke. This can do a lot of damage to the inside of the home, including ruin the paint on your walls, your curtains, and discolor your carpet. It is also a health risk, since breathing this in is not good for anyone, but the elderly, people with allergies, pets, and children are especially affected. Fortunately, though, in most situations you can make a fire that will not smoke up your house without much trouble as long as you follow a few rules.
The damper of your chimney needs to be open before you do anything. Burn some paper or other easily combustible materials in the fireplace, because you want to warm the chimney up. Cold air in the chimney is will push the warm air down and cause the smoke to fill up the room.
Open up the windows in the house and make sure that there is enough air circulating to ignite the fire. A home that is insulated well might not have enough of a draft to allow the wood to catch on fire.
You should also have some fireplace bricks underneath the grill to add some more air circulation to the process. More draft in the fireplace will make it easier for the fire to ignite.
The top of the fireplace also needs to be cleaned out regularly, since anything that gets stuck in it like leaves, sticks, bird nests can keep the smoke from being able to escape and so it floods back into the house, which is exactly where you do not want it.
You should also have the fireplace cleaned by a professional cleaning service if possible, since a layer of creosote is likely built up on the inside of the chimney. This is a tar-like substance that results from burning wood in the fireplace and if your chimney has not been professionally cleaned before and you have lived in your house for many years, then it is time for it to be. Creosote can catch on fire and cause the whole house to burn down, so having it cleaned out is essential.
To keep your fireplace functioning the way that it should, you need to know how to use it and take care of it and by the time winter gets to you, you will be able to enjoy your fireplace once again.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Wednesday, October 17, 2007
Cleaning Out Your Refrigerator
I love my food, but unfortunately, if I do not remember to keep my refrigerator cleaned out regularly, mold loves my food, too. Often people who have busy lives working and taking care of children cannot remember to clean their refrigerators out as often as they probably need to and since they have more people in the house to feed, there will also be more food. More food in the refrigerator equals more of an opportunity for bacteria and mold to grow. This is not typically a problem as long as someone keeps an inventory of what is in the refrigerator and what needs to be thrown away. You cannot completely keep mold out of your refrigerator because it exists in its spore form in the air that we breathe and unless we are talking about an extremely controlled situation like a hospital clean room, it is truly everywhere. There is not really any escaping it and while mold can grow in your fridge, you can do things to inhibit its growth rate.
Take anything that is outdated and obviously inedible out of your refrigerator and throw it away. Cleaning out everything from the refrigerator and setting it aside to go through later is a good idea when you need to clean out the entire refrigerator and sterilize it. Gather whatever chemicals you might want to use for cleaning the fridge and while this can include bleach, you might want to find another alternative that kills mold and bacteria specifically. If you only have bleach, though, go ahead and use it; just do not mix bleach with any other household chemicals.
Wash all the surfaces in the refrigerator with whatever cleaning solution you have decided on, including the racks in the door and the shelves and drawers inside the main part of the unit itself. Give it a good and thorough scrubbing. This is probably something that you should consider doing between two and three times a year or possibly more, depending on how messy your fridge gets.
When you are done cleaning the inside of the refrigerator (and the outside, if it needs it), it is time to go through what you took out. Take anything that you no longer desire and is no longer edible and throw it away. If any jars have any sticky residue on the bottoms of them, wash these off with a warm rag so you don’t get sticky grape jelly or whatever it is back on the surface of your clean fridge.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Take anything that is outdated and obviously inedible out of your refrigerator and throw it away. Cleaning out everything from the refrigerator and setting it aside to go through later is a good idea when you need to clean out the entire refrigerator and sterilize it. Gather whatever chemicals you might want to use for cleaning the fridge and while this can include bleach, you might want to find another alternative that kills mold and bacteria specifically. If you only have bleach, though, go ahead and use it; just do not mix bleach with any other household chemicals.
Wash all the surfaces in the refrigerator with whatever cleaning solution you have decided on, including the racks in the door and the shelves and drawers inside the main part of the unit itself. Give it a good and thorough scrubbing. This is probably something that you should consider doing between two and three times a year or possibly more, depending on how messy your fridge gets.
When you are done cleaning the inside of the refrigerator (and the outside, if it needs it), it is time to go through what you took out. Take anything that you no longer desire and is no longer edible and throw it away. If any jars have any sticky residue on the bottoms of them, wash these off with a warm rag so you don’t get sticky grape jelly or whatever it is back on the surface of your clean fridge.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
General Rules For Mold Testing Kits
If you are unfortunate enough to have to test your home for mold, you are probably thinking that this is going to be a pretty inconvenient thing to have to do. Well, it might not be fun to think that you have disease-causing mold living in your house, but doing the actual test to determine if it exists is not really that hard to conduct at all. Whatever kind of test kit you end up using, the directions on the package must be followed to the exact letter or you will probably render the test useless. There are a few quite general rules that you should follow to get the most out of your testing kits.
If you can see the mold growing in your wall, ceilings, carpet, or on anything else in the home, you do not really have to do any guesswork as to whether you need to test the home or not. If you see anything like this, do not only test that room; test your entire home. Every room needs to be tested and this includes the ventilation system, because it extends to every room in the house and if mold is growing in the vents, it will spread to the rest of the house.
Run the air conditioner or fans in every room in your home before you put out the test kits so that if there are any mold spores in the room, they will be stirred up into the air and will settle down in the kit. Do not set them up anywhere high; a coffee table or somewhere around the mid to low level of the room should be fine. If you set them up too high, you may not get a good sample.
If there happens to be mold growing visibly on anything, you can use a piece of scotch tape to lift the mold up off the surface and place it into the test kit. There is a method that you can use involving scraping some of the mold into the kit with a knife, but since this can stir up mold spores even more, unless you are wearing a respirator, you are probably better off using the tape method.
To test the ventilation system, the best thing that you can do is tape a test against the grill of one of the ventilation ducts so that the air coming out of it is hitting the testing kit at a 90 degree angle. This will allow you to get the maximum amount of exposure.
Jim Corkern is a writer and promoter of
Emergency Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
If you can see the mold growing in your wall, ceilings, carpet, or on anything else in the home, you do not really have to do any guesswork as to whether you need to test the home or not. If you see anything like this, do not only test that room; test your entire home. Every room needs to be tested and this includes the ventilation system, because it extends to every room in the house and if mold is growing in the vents, it will spread to the rest of the house.
Run the air conditioner or fans in every room in your home before you put out the test kits so that if there are any mold spores in the room, they will be stirred up into the air and will settle down in the kit. Do not set them up anywhere high; a coffee table or somewhere around the mid to low level of the room should be fine. If you set them up too high, you may not get a good sample.
If there happens to be mold growing visibly on anything, you can use a piece of scotch tape to lift the mold up off the surface and place it into the test kit. There is a method that you can use involving scraping some of the mold into the kit with a knife, but since this can stir up mold spores even more, unless you are wearing a respirator, you are probably better off using the tape method.
To test the ventilation system, the best thing that you can do is tape a test against the grill of one of the ventilation ducts so that the air coming out of it is hitting the testing kit at a 90 degree angle. This will allow you to get the maximum amount of exposure.
Jim Corkern is a writer and promoter of
Emergency Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Subscribe to:
Posts (Atom)
